Pages

Wednesday, April 30, 2014

S3cmd : Used to copy files to s3 bucket from server. AWS

S3cmd : AWS command used to copy/Sync content to S3 bucket

s3cmd can be installed from epel repo or by manually compiling the code.

While installing from epel there could be dependency issue for the python.
while using epel repo we need the python version 2.4 in the server if you are having another version of python its better to go with the manual installation.

## RHEL/CentOS 6 32-Bit ##
# wget http://download.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
# rpm -ivh epel-release-6-8.noarch.rpm

## RHEL/CentOS 6 64-Bit ##
# wget http://download.fedoraproject.org/pub/epel/6/x86_64/epel-release-6-8.noarch.rpm
# rpm -ivh epel-release-6-8.noarch.rpm

yum install s3cmd

For manual installation Download the tar file from

http://sourceforge.net/projects/s3tools/files/s3cmd/

get the tar file of the needed version .
make sure you have a python version > than 2.4 installed in the server.

untar the file using tar zxvf or zjvf as per the need and use python to run the installation script

python setup.py install

..

Configuring/Reconfiguring the s3cmd command

s3cmd --configure

Enter new values or accept defaults in brackets with Enter.
Refer to user manual for detailed description of all options.

Access key and Secret key are your identifiers for Amazon S3
Access Key: xxxxxxxxxxxxxxxxxxxxxx
Secret Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx

Encryption password is used to protect your files from reading
by unauthorized persons while in transfer to S3
Encryption password: xxxxxxxxxx
Path to GPG program [/usr/bin/gpg]:

When using secure HTTPS protocol all communication with Amazon S3
servers is protected from 3rd party eavesdropping. This method is
slower than plain HTTP and can't be used if you're behind a proxy
Use HTTPS protocol [No]: Yes

New settings:
Access Key: xxxxxxxxxxxxxxxxxxxxxx
Secret Key: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Encryption password: xxxxxxxxxx
Path to GPG program: /usr/bin/gpg
Use HTTPS protocol: True
HTTP Proxy server name:
HTTP Proxy server port: 0

Test access with supplied credentials? [Y/n] Y
Please wait, attempting to list all buckets...
Success. Your access key and secret key worked fine :-)

Now verifying that encryption works...
Success. Encryption and decryption worked fine :-)

Save settings? [y/N] y
Configuration saved to '/root/.s3cfg'

 

# s3cmd mb s3://test
Bucket 's3://test/' created

# s3cmd ls s3://test/

Upload a file
# s3cmd put file.txt s3://test/

Upload Similar files
# s3cmd put *.txt s3://test/

Uploading complete Directory
# s3cmd put -r upload-dir s3://test/
Upload files in a directory
# s3cmd put -r upload-dir/ s3://test/

Get a file
# s3cmd get s3://test/file.txt

Removing file from s3 bucket
# s3cmd del s3://test/file.txt
File s3://test/file.txt deleted

Removing directory from s3 bucket
# s3cmd del s3://test/backup
File s3://test/backup deleted
Sync direcotry .
# s3cmd sync ./back s3://test/back

attributes that can be used with Sync
--delete-removed :-remove files that are removed from the local directory .
--skip-existing :-Don't sync the files already synced.

—exclude / —include — standard shell-style wildcards, enclose them into apostrophes to avoid their expansion by the shell. For example --exclude 'x*.jpg' will match x12345.jpg but not abcdef.jpg.
—rexclude / —rinclude — regular expression version of the above. Much more powerful way to create match patterns. I realise most users have no clue about RegExps, which is sad. Anyway, if you’re one of them and can get by with shell style wildcards just use —exclude/—include and don’t worry about —rexclude/—rinclude. Or read some tutorial on RegExps, such a knowledge will come handy one day, I promise ;-)
—exclude-from / —rexclude-from / —(r)include-from — Instead of having to supply all the patterns on the command line, write them into a file and pass that file’s name as a parameter to one of these options. For instance --exclude '*.jpg' --exclude '*.gif' is the same as --

Tuesday, April 29, 2014

SSH-Tunneling

Main Options we use in ssh tunneling
-L [bind_address:]port:host:hostport

Specifies that the given port on the local (client) host is to be forwarded to the given host and port on the remote side. This works by allocating a socket to listen to port on the local side, optionally bound to the specified bind_address. Whenever a connection is made to this port, the connection is forwarded over the secure channel, and a connection is made to host port hostport from the remote machine. Port forwardings can also be specified in the configuration file. IPv6 addresses can be specified with an alternative syntax: [bind_address/]port/host/hostport or by enclosing the address in square brackets. Only the superuser can forward privileged ports. By default, the local port is bound in accordance with the GatewayPorts setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of “localhost” indicates that the listen- ing port be bound for local use only, while an empty address or ‘*’ indicates that the port should be available from all interfaces.

 
-N Do not execute a remote command. This is useful for just forwarding ports (protocol version 2 only).


-R [bind_address:]port:host:hostport

Specifies that the given port on the remote (server) host is to be forwarded to the given host and port on the local side. This works by allocating a socket to listen to port on the remote side, and whenever a connection is made to this port, the connection is forwarded over the secure channel, and a connection is made to host port hostport from the local machine.


Port forwardings can also be specified in the configuration file. Privileged ports can be forwarded only when logging in as root on the remote machine. IPv6 addresses can be specified by enclosing the address in square braces or using an alternative syntax: [bind_address/]host/port/hostport.

By default, the listening socket on the server will be bound to the loopback interface only. This may be overridden by specifying a bind_address. An empty bind_address, or the address ‘*’, indicates that the remote socket should listen on all interfaces. Specifying a remote bind_address will only succeed if the server’s GatewayPorts option is enabled (see sshd_config(5)).

If the port argument is ‘0’, the listen port will be dynamically allocated on the server and reported to the client at run time.

-f Requests ssh to go to background just before command execution.

This is use-ful if ssh is going to ask for passwords or passphrases, but the user wants it in the background. This implies -n. The recommended way to start X11 programs at a remote site is with something like ssh -f host xterm.

If the ExitOnForwardFailure configuration option is set to “yes”, then a client started with -f will wait for all remote port forwards to be success- fully established before placing itself in the background.

 

Difference between Reverse tunneling and Normal tunneling.

 

SSH-Tunnel

 

 

Normal tunneling

 

ssh -L 8888:www.linux.ro:80 user@computer -N

ssh -L 8888:www.linux.ro:80 -L 110:mail.linux.ro:110 \

25:mail.linux.ro:25 user@computer -N

The second example (see above) show you how to setup your ssh tunnel for web, pop3

and smtp. It is useful to recive/send your e-mails when you don't have direct access

to the mail server.

 

For the ASCII art and lynx browser fans here is illustrated the first example:

 

+--------------+<--port 22-->+--------------------+<--port 80-->o-----------+

|SSH Client|----------------------|ssh_server|----------------------|   host    |

+-------------------+                                  +----------+                                            o-----------+

localhost:8888                                            computer                             www.linuxon.ro:80

 

 

For example, if the remote server in question was myserver.example.com you could run the following command on your local system to create a tunnel as described above:

 

ssh -T -N -L 3308:localhost:3306 myserver.example.com

The meat of the command is the -L option, which tells ssh to listen on port 3308 locally and then on the remote side to forward all traffic on that port to localhost:3306. Note that the localhost here is not referring to the local system but rather where to forward things to on the remote side, in this case to localhost on the remote side.

 

ssh -T -N -L 3308:private.local:3306 myserver.example.com

Here, ssh listens on port 3308 on the local system and it forwards that data to port 3306 on private.host, but it does that via the server myserver.example.com. In other words the local traffic on port 3308 gets transferred first to the remote system which then transfers it to port 3306 on private.host. Of course, if private.local's mysql server is only listening on its local interface this won't work, you'll need something more involved.

 

ssh -R 9001:intra-site.com:80 home (Executed from 'work')

Once executed the SSH client at ‘work’ will connect to SSH server running at home creating a SSH channel. Then the server will bind port 9001 on ‘home’ machine to listen for incoming requests which would subsequently be routed through the created SSH channel between ‘home’ and ‘work’. Now it’s possible to browse the internal site
by visiting http://localhost:9001 in ‘home’ web browser. The ‘work’ will then create a connection to intra-site and relay back the response to ‘home’ via the created SSH channel.

 

 

 

Monday, April 28, 2014

SVN access manager

To use SVN Access Manager you need at least:

a working subversion installation
a MySQL Database, version 4 or higher, a PostgreSQL 8 or higher database or an Oracle 10g or higher database
an Apache web server, version 2.0 or higher with DAV, mod_authz and SVN support
PHP version 5.2 or higher with working oci8 support if using Oracle database

To use SVN Access Manager you need at least:
a working subversion installation
a MySQL Database, version 4 or higher, a PostgreSQL 8 or higher database or an Oracle 10g or higher database
an Apache web server, version 2.0 or higher with DAV, mod_authz and SVN support
PHP version 5.2 or higher with working oci8 support if using Oracle database

Go to a directory where the software can be accessed by your Apache web server. Unpack the archive. For our example do the following:
http://sourceforge.net/projects/svn-access-mana/files/
# mkdir /etc/svn
# mkdir /etc/svn-access-manager
# mkdir /usr/share/svn-access-manager
# chown apache:apache /etc/svn /etc/svn-access-manager
# cd /usr/share/svn-access-manager
# tar -xvfz svnaccessmanager-0.5.0.0.tar.gz

2.2.3 Setup a MySQL database and a database user

You need a database for SVN Access Manager and an user with full access to this database. To create the database do the following as root user of your MySQL database:

CREATE DATABASE svnadmin;
To create a user having access to this database do the following as root user of your MySQL database:

CREATE USER 'svnadmin'@ 'localhost' IDENTIFIED BY '*******';

GRANT USAGE ON * . * TO 'svnadmin'@ 'localhost' IDENTIFIED BY '*******'
WITH MAX_QUERIES_PER_HOUR 0 MAX_CONNECTIONS_PER_HOUR 0
MAX_UPDATES_PER_HOUR 0 MAX_USER_CONNECTIONS 0 ;

GRANT ALL PRIVILEGES ON `svnadmin` . * TO 'svnadmin'@ 'localhost';
After finishing the database work continue with installing SVN Access Manager.

If you get an error "No database selected" during installation check if the database user has sufficient rights to access and to work with the database!